- OP-COM OBD2 PC Based Opel Diagnostic tool fast from USA! Latest Firmware
- Op-com Cable USB Cable and device CD with included free software and drivers (Sorry no support on the software is provided)
- Works with: Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. Powerful tool!
- Read out and clear fault codes, Shows you live data, Lets you to perform output test, and supports remote, and key programming. Supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples. Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000) Fault codes will be shown with available information: Compatible with all Windows Operating Systems including XP, Vista and Windows 7 both 32 bit and 64 bit. Full fault code text description Full status information (Present, Not present, Intermittent) Download software
- You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window. The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast! Run output tests with many controllers such as: PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps You will get a feedback on the state of the activated output. This will helps you to find the failed. Components more easily. With this product you can learn keys to immobiliser, and remote keys to the central door locking. You can also reset, and program the following immobiliser related items: ECM, BCM, IPC. You will need the vehicle security code, which can be found on the CAR-PASS. You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva You can code SAB6, and SAB8 airbags with the software. The diagnostic interface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters. Possible List of cars this may work with: Agila 2000-2009 Antara 2009 Astra-F 1992-2002 Astra-G 1998-2010 Astra-H 2004-2010 Astra-J 2010 Calibra 1996-1999 Campo 2001-2003 Captiva 2009 Captiva MAXX 2010 Combo-C 2001-2010 Corsa-B 1994-2003 Corsa-C 2001-2010 Corsa-D 2009-2010 Frontera 1996-1999 Frontera-B 1999-2003 Insignia 2010 Meriva 2003-2009 Monterey 1997-1999 Movano 1999-2010 Omega-b 1994-2003 Sintra 1997-1999 Speedster/VX220 2001-2010 Tigra 1999-2000 Tigr